SD Strike Freedom
,6-2 to 6-1 and assemble holes through the paste.
Like this is seen from behind.
,6-2 to assemble the list. (B)
6-3,6-4 build a paste.
o get to the top to seal.
I'm on the same assembly 6-5,6-6.
Millet paste.
6-7 and paste it into the white part.
Print 6-7,6-8 to reverse side of millet paste. (B)
6-9,6-10,6-11 and assemble the combine. (C)
The combination of tight 6-9 and 6-10.
切取線of 6-10 from the hole a little bigger is better in the clipped.
6-10 has a margin for paste side by side to come after the combine.
I'm 6-14 and assemble. From the fingertips of the index finger to come inside, and red lines and pasted it in the corner of the game as you see fit.
Difficult to understand, photographs and pins in the Boke I'm sorry.
6-13 to 6-14, paste, paste it into Ha.
6-12 has assembled a paste.
Ha ² with a red line the sides of millet paste. (D)
Russia and combine the two.
From 6-15 to 6-17 are put together.
Millet paste assembled 8-1,8-2,8-6. (B)
And a desk to use the plane as歪MANAI Please note that.
4 to create the same thing.
The assembled Paste 8-3,8-4,8-5,8-6 millet. (B)
This might also create four.
² millet paste and Russia.
8-8 to build a paste ,8-7 is put together.
8-9,8-10 and assemble the wings to paste.
Put together part of the red line.
Photo 8-9,8-10 of the school bag of parts and is connected to the overlap width, shape, so it was a distortion to change the terms.
Millet paste.
8-14,8-15 and assemble, and the straight red line to be part of millet paste.
8-16 paste inside the assembly.
13 from 8-11 in the same assembly, two millet paste.
The luck completed paste inside.
,2-2 to 2-1 in the circular to be折RI曲GEMASU mound.
2-1 and put in a 2-2 pasting.
Build a 2-3 half-way, first as part of the paste.
2-4 and 6 are put together in the same way.
2-8 to build a paste ,2-7.
,2-9 to 2-7 and assemble back together with the lower hem, millet paste.
I think a little bit tight. 2-9 clipping a little bigger might be better to.
And three rear underside of the trim parts, millet paste. (B)
,2-11 to 2-10 and assemble the red line along the edge of the paste. (B)
2-12,2-13,2-14 millet paste.
And assembly.
2-15,2-16 build into it, and paste parts. (C)
Paste in place, please. Excuse me in half.
And, in Russia and paste into a hardware. (D)
May be a little tight.
² the two sides have set a red line and paste. (E)
Build a 2-17, there is no red line as part of gaps and paste it into Ho.
2-18, and build a paste.
It is an appropriate location, please paste.
2-19 build more paste.
From the middle to just paste a little bit before I'm about.
Put the head clue now.
Making a lot of chest and got sloppy.
Assembly of the head.
,1-2 and 1-1 to build a paste. (A)
I build a 1-3,1-4. (B) (c)
Photos as a camera placed in the area, please put on the inside overlap width.
a, b, c and side step for the lower hem millet paste. (B)
'm 1-10 and assemble. (D)
1-14 portion of the crop × ,1-12 ,1-13 on the back of the building ,1-14 from the paste.
Looking from behind like this.
Paste 1-12,1-13 to 1-11. (e)
Please trim to the lower hem of 1-14.
From 1-15 to 1-18 in the assembly are the same. (F)
d to e, f mounted. (G)
Build a 1-19, g attached to.
Attach the ,1-20. (B)
1-22 to 1-23 with a photo attached ,1-21 sides have set a red line millet paste. (H)
Build a 1-25,1-26, h the red line to the edge of the photo to attach together. (I)
Build a 1-24,1-27, millet paste. (J)
i and j to paste. (C)
Put together from 1-5 to 1-9, millet paste. (D)
Lee, B, C, D and Paste the lather, is completed.
The expansion plan has leg up.
First, his right foot.
Build a 3-1,3-2,3-3,3-4, millet paste. (B)
Build a 3-5,3-6,3-7, millet paste. (B)
The sides have set a red line ² millet paste and Russia.
,3-11 to 3-10 to assemble millet paste. (C)
Build a 3-9, and Ha and millet paste.
Build a 3-8, red millet paste trim line.
Bond overlap width of the red on the left and right to intervene 3-8 from the paste.
Build a 3-12, the top surface of the paste. Then, treat the red line of 3-8.
4-12 from his left foot in the 4-1 are put together in the same way.
Loin of UPLOADED expansion plan.
5-1,5-2,5-3 to build a ,5-3 and paste it into 5-1.
The same is 5-6 from 5-4.
From 5-8 to 5-11 to 5-9 and assemble a paste ,5-10 contest, combine the rest.
Paste and millet ,5-7,
In addition to ,5-12 ,5-13 and assemble, millet paste.
From 5-14 to 5-19 and assemble, millet paste.
5-17 and 5-15 from 19 parts of a combination of luck and paste the guide. To the appropriate position.
Install armor around.
One photo and paste it into such.
Install armor around.
Paste the upper body and the rail gun.
Finally I stood.
Good Luck
[.rar]
prewpraw-model.blogspot.com
pepakura.kujiracraft
mabikaze paperworks
ป้ายกำกับ :Anime,Model,Gundam